Available To Pre-Order
Warning: Last items in stock!
THIS IS AN ADVANCE RESERVATION - ETA SUMMER 2019.
ESTIMATED PRICE - AS A GUIDE ONLY - BASED ON CURRENT COSTS ETC - £259.00. YOU ARE ONLY CHARGED WHEN THE MODELS HAVE BEEN DELIVERED. IF THE FINAL PRICE IS 10% MORE THAN OUR ESTIMATE WE WILL CONTACT YOU BEFORE WE CHARGE.YOU WILL OF COURSE PAY A LOWER PRICE SHOULD OUR COST REDUCE.
PAY A MINIMUM DEPOSIT OF 10% OF OUR ESTIMATED PRICE AND UPGRADE TO A 15% DISCOUNT OFF OUR FINAL SHELF PRICE - NORMALLY 10%. SEE "DISCOUNT SCHEMES" FOR FULL DETAILS.
IF YOU WISH TO PAY A DEPOSIT MAKE A NOTE IN THE ORDER COMMENTS BOX AT CHECKOUT.
THERE ARE DETAIL DIFFERENCES FOR EACH ROADNAME AND WITHIN EACH ROADNAME. PLEASE REFER TO THE SCALETRAINS WEB SITE FOR FURTHER INFORMATION. WE HAVE LISTED THE VARIOUS ROADNAME AND CAB NUMBERS TOGETHER WITH THEIR REFERENCE NUMBER IN THE IMAGE SECTION.
PLACE YOUR SELECTION IN THE ORDER COMMENTS BOX. THE PRICE QUOTED IS FOR ONE MODEL.
These Rivet Counter DASH 9-44CW Locomotives Feature :
◾Up to six (6) different road numbers
◾Printed and LED lighted number boards
◾Operating deck or pilot-mounted LED ditch lights
◾Five (5) cabs
◾“Gullwing” with three (3) side windows
◾“Gullwing” with four (4) side window
◾Standard safety cab with low headlight
◾Standard safety cab with high headlight
◾Spartan cab with high headlight (C40-9)
◾Four (4) step or five (5) step stepwells
◾Narrow or wide profile end handrails
◾Dayton Phoenix (DPG) Model 280620 or Motive Equipment (MEI) ME7000 HVAC Units
◾Early or late (“tri-fold” power assembly access doors) engine cab profile
◾Early flanged or late non-flanged exhaust stack housing
◾Low or high rear sand filler
◾GE “nub” pattern walkway tread
◾Accurately profiled frame with separately applied plumbing and cabling
◾Factory-applied detail parts: wire grab irons, snowplow, trainline hoses, 3-hose MU clusters, MU cable, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted bell, brake wheel, exhaust stack, and more
◾Nose door with window
◾Detailed cab interior with floor, rear wall, seats, and controls
◾Tinted cab side windows
◾“Bathtub” exhaust silencer
◾5,000 gallon fuel tank
◾GE Hi-Ad trucks with separately applied brake cylinders and air plumbing
◾Semi-scale Type E knuckle couplers – Micro-Trains compatible
◾Body mounted coupler box – accepts Micro-Trains 1015/1016 type couplers
◾Motor with 5-pole skew wound armature
◾All-wheel electrical pick-up
◾Directional LED headlights
◾Printing and lettering legible under magnification
◾Operates on Code 55 and 80 rail
◾Durable packaging safely stores model
◾Minimum Radius: 9 ¾”
◾Recommended Radius: 11”
These DCC & sound equipped locomotives also feature :
◾ESU-LokSound Next18 Select Micro DCC and sound decoder with “Full Throttle”
◾Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more
◾Operates on both DC and DCC layouts
No customer reviews for the moment.