ADVANCE RESERVATION - GE Dash 9-44CW Locomotive - BNSF/Heritage III

Scaletrains

SXT-DASH9BNSFH3

New product

Available To Pre-Order

£ 299.00

Add to wishlist

THIS IS AN ADVANCE RESERVATION - ETA LATE 2019/EARLY 2020.

ESTIMATED PRICE - AS A GUIDE ONLY - BASED ON CURRENT COSTS ETC - £299.00. YOU ARE ONLY CHARGED WHEN THE MODELS HAVE BEEN DELIVERED. IF THE FINAL PRICE IS 10% MORE THAN OUR ESTIMATE WE WILL CONTACT YOU BEFORE WE CHARGE.YOU WILL OF COURSE PAY A LOWER PRICE SHOULD OUR COST REDUCE.

PAY A MINIMUM DEPOSIT OF 10% OF OUR ESTIMATED PRICE AND UPGRADE TO A 15% DISCOUNT OFF OUR FINAL SHELF PRICE - NORMALLY 10%. SEE "DISCOUNT SCHEMES" FOR FULL DETAILS.

IF YOU WISH TO PAY A DEPOSIT MAKE A NOTE IN THE ORDER COMMENTS BOX AT CHECKOUT.

PLACE YOUR SELECTION IN THE ORDER COMMENTS BOX. THE PRICE QUOTED IS FOR ONE MODEL.

SXT31843 617 / DCC & Sound Equipped
SXT31845 4434 / DCC & Sound Equipped
SXT31849 4562 / DCC & Sound Equipped

The Rivet Counter series definitive DASH-9 locomotive pushes the boundaries of realism in model railroading with operating LED front, rear, and side walkway lights plus railroad, road number, and era-specific details.

Road Number Specific ScaleTrains:
◾Era: 2000 - present
◾Road numbers 617 Ex (ATSF 617), built 2-3/94
◾GE safety cab with “gull-wing” roof profile, low headlight, and three (3) side windows
◾Operating front pilot face mounted LED ditch lights
◾4-step stepwells with see through steps
◾Wide profile end handrails
◾One-piece nose top grab irons
◾Large Sinclair “ice skate” communication antenna and small Sinclair “ice skate” End of Train (EOT) telemetry antenna
◾Early curved engine cab profile
◾Early dynamic brake exhaust
◾Separate air tanks with upper mounting brackets
◾Dual fuel fills per side with rear fill “blanked”

◾Road numbers 4434, built 1-12/99
◾ ◾GE Safety cab with “gull-wing” roof profile, low headlight, and four (4) side windows
◾Operating front deck mounted LED ditch lights
◾Unpainted HVAC unit
◾5-step stepwells with see through steps
◾Narrow profile end handrails
◾Two-piece nose top grab irons
◾Octagonal antenna dome
◾Late angled engine cab profile with tri-fold power assembly access doors
◾Late dynamic brake exhaust
◾Late non-flanged exhaust stack housing
◾Tall latched access door on long hood end
◾Separate air tanks with lower mounting brackets
◾Dual fuel fills per side

◾Road numbers 4519, built 1-12/99
◾GE Safety cab with “gull-wing” roof profile, low headlight, and four (4) side windows
◾Operating front deck mounted LED ditch lights
◾5-step stepwells with see through steps
◾Narrow profile end handrails
◾Two-piece nose top grab irons
◾Octagonal antenna dome
◾Late angled engine cab profile with tri-fold power assembly access doors
◾Late dynamic brake exhaust
◾Late non-flanged exhaust stack housing
◾Tall latched access door on long hood end
◾Separate air tanks with lower mounting brackets
◾Dual fuel fills per side

◾Road numbers 4562, built 1-12/99
◾GE Safety cab with “gull-wing” roof profile, low headlight, and four (4) side windowsO
◾Operating front deck mounted LED ditch lights
◾HVAC unit swapped from Warbonnet unit
◾5-step stepwells with see through steps
◾Narrow profile end handrails
◾Two-piece nose top grab irons
◾Octagonal antenna dome
◾Late angled engine cab profile with tri-fold power assembly access doors
◾Late dynamic brake exhaust
◾Late non-flanged exhaust stack housing
◾Tall latched access door on long hood end
◾Separate air tanks with lower mounting brackets
◾Dual fuel fills per side

◾Road numbers 4596, built 1-12/99
◾GE Safety cab with “gull-wing” roof profile, low headlight, and four (4) side windows
◾Operating front deck mounted LED ditch lights
◾5-step stepwells with see through steps
◾Narrow profile end handrails
◾Two-piece nose top grab irons
◾Octagonal antenna dome
◾Late angled engine cab profile with tri-fold power assembly access doors
◾Late dynamic brake exhaust
◾Late non-flanged exhaust stack housing
◾Tall latched access door on long hood end
◾Separate air tanks with lower mounting brackets
◾Dual fuel fills per side
◾Variations in conspicuity striping, logos, and labels
◾Orange painted nose grabs and sandfillers
◾Short snowplow with open doors and grab irons
◾Nose door with window
◾Motive Equipment Inc. (MEI) ME7000 HVAC Unit
◾Lost-wax brass cast Nathan AirChime K3LAR2 Horn mounted on engine cab
◾High-mounted rear sandfiller
◾Early lifting lugs on ends of radiator wings
◾Fuel tank mounted steel bell
◾Late Hi-Ad trucks with cantilever struts on right front and left rear sideframes
◾Spare coupler knuckle holders on rear pilot face

Rivet Counter DASH 9-44CW Locomotives Also Feature:
◾Fully-assembled
◾Several different road numbers
◾Operating front, rear, and side LED walkway lights
◾Printed and LED lighted number boards
◾Rotating axle bearing caps
◾Spare coupler knuckle holders on truck sideframes or rear pilot face
◾GE “nub” pattern walkway tread
◾Accurately profiled frame with separately applied plumbing and traction motor cabling
◾Detailed cab interior with separate floor, rear wall, seats, and desktop controls or control stand, per prototype
◾Tinted cab side windows
◾26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
◾“Bathtub” exhaust silencer
◾5,000-gallon fuel tank
◾Factory-applied detail parts: wire grab irons, snowplow, spare knuckles, trainline hoses, 3-hose MU clusters, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted bell, brake wheel, exhaust stack and more
◾Semi-scale coupler buffer
◾Durable metal semi-scale Type E knuckle couplers
◾Motor with 5-pole skew wound armature
◾Dual flywheels
◾All-wheel drive
◾All-wheel electrical pick-up
◾Directional LED headlights
◾Printing and lettering legible under magnification
◾Operates on Code 70, 83, and 100 rail
◾Packaging safely stores model
◾Minimum Radius: 18”
◾Recommended Radius: 22”

These DCC & sound equipped locomotives also feature:
◾ESU-LokSound 5 DCC and Sound decoder with “Full Throttle”
◾Two (2) cube-type speakers
◾Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more
◾ESU-designed PowerPack with two (2) super capacitors
◾Operates on both DC and DCC layouts*


 * Note: some sound and lighting functions on DCC & sound-equipped versions are not operable using DC

No customer reviews for the moment.

Write a review

ADVANCE RESERVATION - GE Dash 9-44CW Locomotive - BNSF/Heritage III

ADVANCE RESERVATION - GE Dash 9-44CW Locomotive - BNSF/Heritage III

Other products in the same category: